Description
Flashing Crown Remover
The flashing crown remover is a single stainless steel hand pattern from the crown remover section of our supplier catalogue. It sits on the same page as the Guyer No. 7 and the Morrell set. The catalogue gives its name but no further caption. So the photos here are the most reliable way to judge its working end.
What We Know From the Catalogue
The entry lists the instrument simply as Flashing Crown Remover, with no length or tip description. Therefore we will not guess at measurements. Instead, we suggest you study the main image, then compare the tip with other removers on your tray. If you need a dimension before ordering, just ask our team.
How a Hand Remover Is Used
Hand removers work through small, controlled movements. First, the clinician places the tip at the margin of the crown. Then gentle, repeated force works the cement loose. Good light and retraction help, because the tip must stay on the margin throughout. For example, an assistant can hold the cheek aside with a mirror while the dentist works.
Turnaround Between Patients
Every flashing remover leaves our shelves unsterilized. So schedule a wash, rinse and autoclave cycle before its first clinical day. After each use, check the tip for burrs or bending, since a damaged end loses purchase. A person on our United States team examines this pattern by hand before it is boxed. In addition, the flashing pattern carries our standard pledge: three years against manufacturing defects in material and finish.
The steel follows the ASTM F899 standard. Broader restorative tools are available in our dental instruments range. For a version with a choice of plain or ridged ends, see the Guyer No. 7 crown remover. Answers about returns and lead times are in our FAQ library.
For use by trained dental professionals only. Cleaning directions are on our care and sterilization page; parcel options appear under shipping and delivery.
Reviews
There are no reviews yet.