Orthodontic Ligature Directors

Description

Orthodontic Ligature Directors

When you tie in an archwire, the twisted ligature ends need to tuck neatly out of the way. An orthodontic ligature director does that job. It guides the tie around the bracket and pushes the cut end under the wire. We stock six forms, so you can match the tool to your routine.

Choosing From Six Forms

• Single Ended and Double Ended: plain directors with one or two working ends.
• Double Ended, Light: a light, double ended director.
• Director / Scaler and Director / Scaler, Slim: a director at one end and a scaler at the other; the Slim is the slimmer of the two.
• Director / Scaler, Coil Spring: the catalogue notes it can activate coil spring and remove modules with one instrument.

How to Narrow It Down

If you only tuck ties, a plain director is enough. However, if you also clear cement or plaque around brackets, a Director / Scaler saves a tool change. And if you often adjust coil springs, the Coil Spring form covers that too. Each form ships singly, so mixing types is easy.

Tucking a Ligature

First, twist the tie snug and cut it short. Then use the director to push the cut end under the archwire or into the bracket gap. As a result, nothing pokes the lip or cheek. Check with a finger sweep before the patient leaves.

Why a Light Form Helps

A lighter tool gives more feel in tight spots. So many clinicians use the light forms for fine work near the gum. In contrast, the standard forms suit routine tucking across the arch.

Ligature Director Tip Care

Wipe the tips right after use, then rinse. Also look for bent tips, because a bent end can slip off the tie. You can usually reshape a slight bend with care, but replace a tool that has cracked.

Director Supply, Steel and Cover

Each orthodontic ligature director matches our written spec, and we look it over in the United States. Material: stainless steel per ASTM F899. Every form, in case of a factory fault, sits under three years against manufacturing defects. Each form reaches you non-sterile and is reusable after cleaning and sterilization. For deeper debris work, see our orthodontic scalers. Visit our orthodontic instrument range or the FAQs.

Professional use only. Read our reprocessing guide and the delivery page for more.