Description
Drill Bits and Burrs for the Hudson Hand Drill
These Hudson drill bits are listed for use with our Hudson hand drill. Six diameters run from a fine 2.0 mm bit to a broad 22.0 mm burr.
Six diameters
Choose 2.0, 9.0, 13.0, 14.0, 16.0 or 22.0 mm. Also, the 2.0 mm bit suits pilot holes. Meanwhile, the larger sizes make wider openings.
Matched to the brace
Our catalogue lists these bits beside the Hudson drill. Therefore they should fit its coupling. Contact us to confirm fit with an older brace.
Who uses Hudson drill bits
Owners of Hudson drills use them for openings in bone. Also, backup and outreach sets keep a range. Furthermore, large sizes need careful technique.
Controlled drilling
Start with gentle pressure and steady turning. Then ease off as the bit nears the far side. Check depth often with large burrs.
Spares
Large burrs dull with use. Consequently, keep a spare of the sizes you use most. In addition, that keeps the set ready.
Fine to broad
The 2.0 mm bit makes a pilot hole, while larger burrs widen the opening. Consequently, work up through sizes gradually. Additionally, that keeps control at each step.
Hudson drill bit diameters
- 2.0 mm and 9.0 mm
- 13.0 mm and 14.0 mm
- 16.0 mm and 22.0 mm
- Ships non-sterile
Care
Brush bone from the cutting edges. Dry and store by size. Replace dull burrs.
Buying from us
Before it ships, our Atlanta inspector looks over every drill bit under good light. Our warranty on every drill bit spans three years against manufacturing defects as standard. To round out the tray, check our Hudson hand drill. A spare drill bit in stores keeps lists moving. Looking for advice on options? Reach out before you order. Browse our complete orthopedic instruments range for other patterns. To read about surgical alloys, open ASTM F899. If you have a question, see the FAQ section.
Not for home use. Exchanges appear on the returns terms. Photos are illustrative. Also, stainless steel contains nickel; check the sterilization page for details.
Reviews
There are no reviews yet.