Holding Part for Endoscope

Description

Holding Part for Endoscope

This endoscope holding part lets the Martin arm hold an endoscope. It is an add-on component, not a stand-alone holder.

What it adds

On its own, the Martin arm holds retractors steady. With this part fitted, the same arm can hold a scope instead. So one system covers both jobs.

Why fix the scope

A hand-held scope moves with every small shift of the holder’s hands. By contrast, a fixed scope gives a steady image. Also, it frees a pair of hands in a crowded room for other tasks.

Part of the Martin system

This part belongs to the Martin holding system. Therefore, you need the post, arm and holding rod to use it. Those parts come as a complete set or one by one, so you can build up over time.

Before you order

The part comes in one size. Because scopes vary, contact us before ordering if you need to confirm fit. Then we can check the endoscope holding part against your scope.

Reprocessing endoscope holding part

Remove the part from the arm after each case. Next, clean its gripping surfaces by hand so no residue stays behind. Finally, dry it and keep it in the same tray as the other Martin pieces.

Endoscope holding part specifications

• Component of the Martin arm system
• Lets the arm hold an endoscope
• One size

Buying from Intrace USA

Your instrument comes with a three-year warranty against manufacturing faults. Also, we check each piece in Atlanta before shipping. You can find care tips in our FAQs. Meanwhile, ASTM F899 describes the steel grades used for surgical instruments. For the full holding system, see our Martin arm. Our full range sits in the surgical retractor category.

Professional use only. Our care and sterilization guide covers images and the nickel in stainless steel; delivery times are in our shipping policy.