Martin Arm Complete

Description

Martin Arm Complete

The Martin arm is a holding system that keeps a retractor or an endoscope steady. This complete set includes a table post, an arm with a joint and a holding rod.

Three parts in one set

The table post mounts the system to the OR table. Next, the jointed arm lets you set the angle and reach. Finally, the holding rod carries the instrument you want to fix in place.

Hands-free holding

Holding a blade or scope for a long case tires any assistant. So a fixed arm takes over that task and keeps the position you set. As a result, the view stays stable.

Retractors or endoscope

Surgeons often use it to hold a hand-held retractor steady. Alternatively, you can add the endoscope holding part for scope work. That way, one system serves both tasks.

Buying parts later

Each part of the Martin arm also comes on its own. So you can replace a worn joint or add a second rod later. Also, the endoscope holding part comes as a separate item.

Looking after Martin arm

Loosen the joint and separate the post, arm and rod before cleaning. Then brush the joint surfaces and flush any gaps with water. Plus, dry each part fully so the joint moves freely next time.

Martin arm specifications

• Complete set: table post, arm with joint, holding rod
• Mounts to the OR table
• Holds retractors or an endoscope

Support after you buy

Plus, the instrument comes with our three-year warranty against defects. In addition, every shipment gets a hand inspection in Atlanta. You can find care tips in our FAQs. Surgical stainless grades fall under ASTM F899. For scope work, add our endoscope holding part. The rest of our surgical retractors is one click away.

For professional use only. See our care and sterilization guide for notes on photos and materials, and our returns policy before you order.