Arthroscopy Instrument Fig 3

Description

Arthroscopy Instrument Fig 3

The arthroscopy instrument fig 3 is a 3.4 mm keyhole hand instrument with the third jaw pattern in this range. Five tip angles help it reach different parts of a joint.

One size, five angles

Figure 3 is made only with a 3.4 mm shaft. However, the tip can point dead ahead, tilt upward a little or a lot, or swing well over to one side. Therefore a small set covers most approaches.

The fig 3 arthroscopy jaw

Every figure in the range has its own working end. Figure 3 adds a third jaw design. Drawings are free on request if you wish to check the shape.

Who uses the arthroscopy instrument fig 3

Knee and shoulder teams reach for it through routine portals. Also, sports clinics keep it in their arthroscopy sets. Also, it complements figures 1, 2 and 4.

A mid-size shaft

At 3.4 mm, the instrument suits most knee and shoulder portals. Meanwhile, it stays slim enough for tight spaces. Additionally, that makes it a practical middle size.

Gentle technique

Open the jaws only when they are in view. Then take small bites or grips. Withdraw with the jaws closed.

Building a fig 3 arthroscopy set

Most teams start with the straight tip and one upward angle. Later, they add the side angles as their caseload grows. Thus the set expands only when needed.

Arthroscopy instrument fig 3 options

• 3.4 mm shaft only
• Tip: straight; up 7; up 15
• Tip: left 30 or right 30
• Supplied non-sterile

Care

Flush the working end and shaft promptly. Dry fully, using air for narrow spaces. Lubricate and check the jaws.

Why we back the arthroscopy instrument

Each arthroscopy instrument keeps written cover spanning three years against manufacturing defects. Our Atlanta team reviews the arthroscopy instrument by hand before it leaves. Busy clinics order two of these for busy lists. For the basics of steels for surgery, see ASTM F899. Need a formal quote? Email our team any time. Also worth a look is our figure 3 with overload protection. Check the entire orthopedic section for extra options. For answers on returns, use our FAQ section.

Sold to licensed professionals. Refund terms are on the returns page. These pictures may show one size, and the steel holds nickel; use our care and cleaning page for details.