Triple Combo Reamer Instrument For Dynamic Hip Screws

Description

Triple Combo Reamer Instrument For Dynamic Hip Screws

The DHS triple reamer prepares three things at once for a dynamic hip screw. In one pass, it drills the lag screw track, the barrel seat and the bevel.

Three steps in one

Without a combination reamer, each step would need its own tool. Therefore the triple reamer saves time and keeps all three cuts aligned. Additionally, it slides over the guide wire.

Setting the depth

The reamer must stop at the right depth. Consequently, the surgeon sets it based on the measured guide wire length. In addition, that prevents reaming into the hip joint.

Who uses the DHS triple reamer

Any hip fracture treated with a sliding hip screw needs it. Because of that, theater staff check it at every set count. Also, a spare avoids delays if it dulls.

Technique tips

Ream slowly under imaging, especially near the end. Then check that the guide wire has not moved. If it advances with the reamer, stop and correct it.

Keeping it sharp

A dull reamer generates heat and needs more force. Therefore inspect the cutting edges regularly. Replace or resharpen as needed.

DHS triple reamer details

• Combination reamer for DHS
• Lag screw track, barrel seat and bevel
• Cannulated for the guide wire
• Ships non-sterile

Reamer care

Bone packs into the flutes, so brush them thoroughly. Flush the cannulation with a fine brush or stylet. Dry the reamer and check the edges.

The cover behind the reamer

A team member in Atlanta inspects each reamer by eye before dispatch. If this reamer develops a production issue, we honor three years against manufacturing defects. Our customer FAQ covers shipping and refunds. Many clinics stock one per tray to cover reprocessing time. More options appear in our orthopedic department. We also prepare a quote within a day or so. Surgeons often add our DHS tap. For details on surgical-grade stainless, go to ASTM F899.

Professional buyers only. Exchange terms show on the returns page. Page images show a typical piece, and the steel holds nickel; consult the care page for details.