Micro-Needle Holder Fig. 2

Description

Micro-Needle Holder Fig. 2

The micro needle holder Fig. 2 has curved jaws on a spring handle. Six lengths span 15 to 23 cm.

Figure 2 pattern

Figure 2 marks the curved-jaw version of this spring holder. So the tip angles toward the vessel and away from your view. That curve helps on vessels that lie at an angle.

Spring handle

A light spring reopens the jaws once you relax. Then you guide the needle along its natural arc with your fingertips. The wrist stays still throughout.

Six lengths

We offer 15, 16.5, 18, 20, 22 and 23 cm. Therefore, one pattern can cover shallow and deep fields. Longer sizes keep your hand outside a deep cavity.

Fig. 1 or Fig. 2

Pick Figure 1 if you like straight jaws in line with the handle. Instead, Figure 2 suits surgeons who prefer the curve. Many microsurgeons keep a micro needle holder Fig. 2 beside a Fig. 1 in the same length.

Reprocessing micro needle holder Fig. 2

Clean the curved jaws with a soft brush along the curve. Next, rinse the micro needle holder Fig. 2 in distilled water. Finally, dry it and store it with the jaws closed but not locked.

Micro needle holder Fig. 2 specifications

• Lengths: 15, 16.5, 18, 20, 22 and 23 cm
• Jaws: curved (Figure 2)
• Handle: spring handle

Our warranty

In addition, we cover this needle holder for three years against manufacturing defects. Also, we check each piece in Atlanta before shipping. So check our FAQs for cleaning and shipping details. Also, ASTM F899 covers surgical instrument steels. For straight jaws, see our micro needle holder Fig. 1. The rest of our needle holders is one click away.

Professional use only. Our care and sterilization guide covers images and the nickel in stainless steel; delivery times are in our shipping policy.