Arm with Joint for Martin Arm

Description

Arm with Joint for Martin Arm

This part gives you the articulated arm with the Martin arm joint, one piece of the Martin holding system. It links the table post to the holding rod.

What the joint does

The joint lets the arm bend and hold an angle. So you can bring the rod close to the field from the side you choose. Then the arm keeps that position while you work.

One piece of three

The system needs a table post, this arm and a holding rod. However, you can buy each one alone if a part wears out. Also, a complete set covers all three at once.

Replacement use

A stiff or loose joint makes positioning slow. In that case, a new arm brings back smooth setup. Plus, a spare arm keeps the system ready while one goes out for repair.

Fit

This arm belongs to the Martin system and suits Martin posts and rods. Because other holders use different fittings, check your set first. Then order the Martin arm joint in its single size.

Reprocessing Martin arm joint

Move the joint through its full range before cleaning. Next, flush the joint area and brush any seams where fluid can collect. Finally, dry the arm fully and store it straight with the joint loose.

Martin arm joint specifications

• Component of the Martin arm system
• Articulated arm with joint
• One size

Why buy from us

Also, every instrument we sell carries three years of cover against manufacturing defects. Also, we check each piece in Atlanta before shipping. For care and cleaning questions, read our FAQs. Surgical stainless grades fall under ASTM F899. To finish the setup, see our Martin arm holding rod. Also, see our whole retractor range.

For trained professionals only. Notes on images and nickel content sit in our care and sterilization guide; see shipping and delivery for dispatch details.