Caspar Retractor Valve

Description

Caspar Retractor Valve

A Caspar retractor valve is the blade that fits a Caspar-type self-retaining retractor in spine surgery. This listing covers the valve only, not the frame.

Widths

Valves come 23, 24 or 25 mm wide. So you can fine-tune the width to the exposure you need. Also, small width steps help match an existing set.

Depths from 25 to 75 mm

Depth runs from 25 mm up to 75 mm. Shallow valves suit shallow approaches, while deeper ones reach further down. Therefore, keep a spread of depths on the tray.

Valve or blade

Caspar sets call their blades valves. However, the job stays the same: hold soft tissue away from the spine. Then the surgeon has a clear view of the working level.

Component only

Valves need a Caspar-type frame to work. Instead of replacing a whole set, you swap the valve. Plus, a spare Caspar retractor valve keeps surgery on schedule.

Cleaning Caspar retractor valve

Detach each valve after the case and rinse it before blood dries. Next, brush the mounting end, which collects debris. Finally, dry the valves and store them in order of depth.

Caspar retractor valve specifications

• Component: valve (blade) only
• Fits: Caspar-type self-retaining retractors
• Widths: 23, 24 or 25 mm
• Depths: 25 to 75 mm
• Use: spine surgery

Supply and warranty

If your instrument shows a manufacturing defect within three years, we will put it right. Then our Atlanta office checks every order before dispatch. So check our FAQs for cleaning and shipping details. Read ASTM F899 to learn about instrument-grade steel. For the frame itself, see our Caspar retractor frame. Beyond this item, browse our surgical retractors.

For professional use only. See our care and sterilization guide for notes on photos and materials, and our returns policy before you order.